Home / Candidate
Positions Available
01 SENIOR FIRE PROTECTION ENGINEER

Minimum Experience and Qualifications Requirements
Minimum bachelor’s Degree from reputable university.

Experience:

Should have worked for a minimum of 1O years in the capacity of senior engineer level in the relevant field and should have worked for major projects of substation & transmission systems (132kV/220kV/400kV systems) involving design review, and site supervision

Work Location: Doha – Qatar


02 Senior SCADA Engineer SCS

Senior SCADA Engineer - SCS
Scope:
Data Collection
Site Investigation & Preliminary Studies
Preparation of tender documents, contract procedures, technical specification, evaluation of bids.
Will be responsible to establish and maintain documented procedures to control and verify the design submitted by the contractor or the design produced by the consultants themselves.
Responsible for design including description, calculation and drawings for the following:
• SCS& Substation Automation.
• RTU hardware & software.
• Data communication and interlocking with Telecomm system.
• Interlocking with protection relays.
• Auxiliary power supply for telemetry equipment.
• Input interfacing to CTs, VTs.
• TDB equipment (Measuring transducers and interposing relays).
Responsible for design review, Inspection & testing procedures review. Has good knowledge of control center software & hardware Responsible for supervising and controlling testing and commissioning.
Only qualified personnel equipped with adequate resources should be assigned for the design and development or design review activities.
Formal documented review of the contractor 's proposal/design should be conducted.
All design changes and modifications are identified and documented and all these changes subject to KAHRAMAA s approval.
Will be responsible for tender document preparation, setting the specifications that meet the requirements of the client, preparation of B.O.Q and evaluation of Bids. All the above works will be under supervision of the client.
Periodically site visit to check the design implemented according to approved documentation.

Minimum Experience and Qualifications Requirements
Minimum bachelor’s Degree from reputable university.

Experience:

Should have worked for a minimum of 1O years in the capacity of senior engineer level in the relevant field and should have worked for major projects of substation & transmission systems (132kV/220kV/400kV systems) involving design review, and site supervision

Work Location: Doha – Qatar

03 ARABIC SPEAKING DOCUMENT CONTROLLER

- 6 YEARS EXPERIENCE IN THE FIELD OF DOCUMENT CONTROL
- MALE PREFEREABL
- LIVING IN QATAR WITH NOC TO TRANSFER SPONSORSHIP
- PACKAGE QAR 8,000


04 ADMIN ASSISSTANT AND INVOICING OFFICER

FEMAIL
6 YEARS EXPERIENCE
ACCOUNTING BACKGROUND
MULTI TASKING
GOOD COMMUNICATION SKILLS
ARABIC LANGUAGE IS ADDED VALUE
TO WORK IN MULTI-CLUTURAL ENVIRNMENT
GOOD PERSONALITY AND APPEARANCE
TRANSFERABLE NOC IF IN QATAR

05 Sous chef

Sous chef (1),
salary between : 6000 QR
8000 QR full package,
nationality: Arabic as 1st choice,
Asian as 2nd choice.

Administrative Assistant

Female - 4 years experience Preferable from Accounting Background MS. Office Experience ( Excel, Word, Powerpoint and Outlook) Organized

Building Services Supervisor (Site)

Minimum Qualifications:

Minimum diploma in Mechanical Discipline from reputable university. Experience:
Should have worked for a minimum of 10 years in the capacity of supervisor level in the relevant field and should have worked in major substation & Transmission projects (132kV /220/400 kV systems) involving supervision, inspection, erection of services in sub stations and associated facilities.

Must be fully conversant / referred all relevant international standards and should have working experience in ISO 9000 systems.

Must have experience in
Supervision of installation, inspection, commissioning & testing of the following works:
• HVAC systems & equipment, erection, commissioning and testing.
• Fire fighting systems & equipment, services, selection of pumps etc.
• Lifting equipment, various pumps and compressors
• All other site service equipment.

Cable Engineer (Site)

Minimum Qualifications:

Minimum bachelor Degree in Electrical Engineering from reputable university. Experience:
Should have worked for a minimum of 10 years in the capacity of engineer level in the relevant field and should have handled major transmission projects (132kV/220/400 kV systems) involving supervision, inspection, erection and commissioning & testing of EHV cables & associated equipment and facilities etc

Should also have carried out / prepared preliminary studies, tender documents, contract procedures, technical specifications, bid evaluation.

Should have experience in factory inspections , material selection, route selection, investigation of existing underground cables, system study, replacement of OHL and provision of underground HV cables, termination of cables.

Must be fully conversant / referred all relevant international standards and should have working experience in ISO 9000 systems.

Cost Control Engineer

At least 8+ years of progressive industry experience
with at least 50% of which must be local/regional (GCC)
Inherent ability to lead teams and resolve issues.
Industry: Facility Management & Maintenance

Document Controller

Field Experience as Document controller
Available In Qatar
NOC
Salary QAR 5000

Electrical Engineer

At least 8+ years of progressive industry experience
with at least 50% of which must be local/regional (GCC)
Inherent ability to lead teams and resolve issues.
Industry: Facility Management & Maintenance

HSE INSPECTOR

Experience Required from Facility Managment and Building Maintenance Services background
Available In Qatar

Invoicing Officer

Job Description Not available

Junior Civil Engineer

Job Description Not available

Mechanical Engineer

At least 8+ years of progressive industry experience
with at least 50% of which must be local/regional (GCC)
Inherent ability to lead teams and resolve issues.
Industry: Facility Management & Maintenance

Mechanical Engineer - Substations

Minimum Qualifications:

Minimum bachelor Degree in Mechanical Engineering from reputable university.
Experience:
Should have worked for a minimum of 10 years in the field of power generation and water desalination stations projects.

Should be aware of design review of all mechanical drawings and documents related to combined cycle power plant and desalination plant , carrying out site supervision through all project construction phases and supervising the testing & commissioning activities .

Should have project management capability to attend periodical project meetings and to take decisions related to mechanical issues relevant to the project activities.

Should have capability to write periodical monitoring and status report reflecting the status of the working process at the site.

MEP PLANNING ENGINEER JOB CODE MS001

MEP - PLANNING ENGINEER
JOB CODE MS001

PREMAVERA
ANALYSIS CAPABILITIES
VARIATIONS

IMMEDIATELY AVAILABLE
RESIDENCE IN QATAR
NOC AVAILABLE

MEP SITE SUPERVISORTESTING And COMMISSIONNING

IMMEDIATELY AVAILABLE
RESIDENCE IN QATAR
NOC AVAILABLE

OHL Design Electrical Engineer

The following are the major duties and responsibilities

Lead design activities of OHL transmission and distribution lines worldwide
- Leading within the design, construction, and refurbishment of overhead lines according to the relevant engineering standards
- In-House designs of overhead lines, new build, and refurbishment
- Feasibility Studies
- Project Management of assigned projects
- Commercial management of assigned projects
- Site Visits as required
- Attend client meetings as required
- FEED (Front End Engineering Design)
- Liaise with team members in other offices throughout the world
- Provide construction guidance
- Consider the effects on Health and Safety through the design
- Ensure Safety and Health practices are adhered to, and employee and public safety is maintained in all aspects of your work
- To undertake and provide leadership using line design software and other propriety software for the following tasks: Production of SAG Tension Reports, Profiles and Route Drawings, Clearance Reports and Calculations, Wire Clearance Drawings, Tower Analysis, Tower Modelling, Insulator Set Design, Foundation Design, Line Profiling and Catenary Support System, Tower Setting Levels, Material Quantification (not exhaustive)
- To carry out any other duties reasonably requested by the employer
Skills and experience required
Essential
- Extensive Experience in OHL Transmission or Distribution Design
- PLS Suite – Advanced User
- Degree Qualified – Electrical
- MS Office Suite Proficient
- Excellent Team Communication Skills
- Eligibility to work in Sultanate of OMAN

Desirable
- Experience of both Transmission and Distribution networks (11kV up to 400kV)
- Membership of an engineering body
OHL design engineer will be based in the office, so he/she should manage transportation.
Job Location: Sultanate of Oman

Operation Manager Oil and Gas

OPERATIONS MANAGER
ROLE PURPOSE
Maximize the profitability and customer satisfaction by planning, supervising and executing all onshore and offshore Services activities as per the requirement of clients under portfolio, and as per company procedures and support the Area Service Manager.

KEY RESPONSIBILITIES
Planning & Coordination
• Plan, coordinate and supervise the activities onshore and offshore
• Handle Manpower allocation as per job requirement
• Manage and ensure optimum utilization of available resources, manpower and cost
• Ensure to complete all the work within the specified time and date and ensure on time delivery of Materials, equipment and manpower
• Work in line with the Operation Manager’s plan and to provide timely update of on-going activities
• Ensure all workers have the required training and being fit with Client requirement
• Support Sales and Operations with details regarding costing
• Conduct timely meetings with workers to understand and handle the work issues or problems if any

Service Delivery Coordination
• Coordinate for all Gate Passes
• Coordinate with Clients for Invoices, SES, etc. on monthly basis
• Handle all customer property without damage
• Prepare monthly reports and logs for various activities performed
• Comply with all HSE rules while working in the workshop

Management & Leadership
• Develop the team and work process
• Manage the team, motivate them and help them to increase their performance
• Manage the team performance to meet the company and department KPI’S and objectives
• Manage day to day work and make sure that goals are achieved
• Select the team and assist in preparing the Man Power Plan
• Support the management and HR for any development in the company

GENERIC RESPONSIBILITIES
Quality, Health, Safety, & Environment (QHSE)
• Adhere to all relevant QHSE procedures, instructions and controls so that XXX provides a safe, world class, secure and environmentally responsible service to customers, the public and its own people
Policies, Systems, Processes & Procedures
• Follow all relevant departmental policies, processes and procedures so that work is carried out in a controlled and consistent manner while delivering a world-class service

Others
• Coordinate with the upper management on work issues
• Send periodic reports as per management needs
• Attend the required meetings or workshops as per management request
• Perform other duties required by the management within the work scope

QUALIFICATIONS
EXPERIENCE
8 to 12 years of work experience in related job and 2 years of work experience in similar position
EDUCATION AND CERTIFICATION
Bachelor’s degree in Petroleum or Mechanical Engineering or equivalent
JOB SPECIFIC SKILLS
Knowledge of Arabic language preferred

Other

Job Description Not available

Procurement Manager

Procurement Manager for Hot Rolling Mill inUnited Arab Emirates
Field of Business: Manufacturing & Production

Protection Engineer

Minimum Qualifications:

Bachelor Degree in Electrical Engineering from a reputable university. Experience:
Should have worked for a minimum of 1O years in the capacity of protection engineer. in the relevant field and should have handled major projects involving supervision, inspection, erection and commissioning & testing of protection systems (132kV/220 /400 kV systems) & associated equipment and facilities etc .

Should also have carried out / prepared preliminary studies, tender documents, contract procedures, technical specifications, bid evaluation.

Must be fully conversant / referred all relevant international standards and should have working experience in ISO 9000 systems.

A minimum of 10 years in senior level as Protection Engineer with all hands on knowledge on Testing Power line Bus bar Protection System, setting and coordinating to the grid systems, Sub Station controls and monitoring. Generator and Power Transformer Protection Circuit and Numerical type Protection relays with following field of knowledge

• Identification I & C Design description
• Installation drawings and layouts and hazardous areas
• Software specifications Documentation and testing
• Hardware specification Documentation and testing
• Logic diagram analysis and DCS system
• Modulating control diagram analysis
• System performance calculation e.g. times logs, displays, Response rate etc.
• Protection equipment data or drawings
• Panel console drawing
• Termination drawings
• Computer Input / Output Schedules

QA / QC ENGINEER

Job Description Not Available

QAQC Engineer Oman

Job Responsibilities
• Perform audits and test of the scope and character necessary to achieve the quality of construction required in the drawings and specifications for all works under the contract performed ON or OFF site.1
• Cary out inspection and checking for all quality related procedures in the site and ensures activity at the site are as per approved method statement and inspection test plan.
• Coordinate with the PM for inspection and meeting about quality problems including the closure of Non-Compliance Report.1
• Report to the PM, control, and monitor all activities related to Quality Management System, QMS.1
• Conduct regular Audit on QA/QC documents of the entire project including certificates, calibration, test results, inspection requests, non-compliance reports and site instruction/observations, permanent materials delivered and other QA/QC documents. Responsible for the closure of Non-conformance, NCR and Site Instruction, SI.
• Audit for the quality and workmanship of every activity, thorough knowledge of all phases of engineering construction relating to Civil, Electrical discipline interfacing the multidisciplinary operations.
• Develop method statement for the activity including risk assessment and job safety environmental analysis and Inspection Test Plan and Checklist based on specifications of the project.
• Carry out Internal Audit at the site as scheduled in the Project Quality Plan, PQP.
• Liaise the QA/QC Team of Contractor for submission of material submittals to Consultant
• The preparation of the projects QA manual control and supervision of all amendments and revisions
• Control and the distribution of all the companies quality documentation
• Monitor all quality related activities on the project
• Perform all internal and external audits on behalf of the MZEC project management
• Verify contractor quality requirements are specified to vendors and contractor documentation submittals. .
• Attend quality management meetings & conduct quality workshop
• The preparation and control of project quality system management documentation prior to project commencement.
• Review quality inspection personnel qualifications and training requirements
• Monitor the disposition of all issued nonconformance reports.
• Monitor the progress and effectiveness of the project quality management system. Recommend and implement improvements when required.
• Coordinate all QA/QC activities with the site QC manager
• Coordinate all quality related correspondence with the customer’s representatives.
• Monitor statistical method reporting.
• Action and close all audits

Work Location: Sultanate of Oman
For QA/QC, we will provide the vehicle.

SCADA Engineer

Job Description Not available

Secretary

Available In Qatar with NOC
Minimum 3 years Experience
MS Office
Organized
Self Motivated
Presentable

Senior Accountant

Responsibilities and Duties

Prepare, supervise and maintain the revenues, budget, invoices, payments, receipts, statement of accounts, petty cash, purchase orders, inventory, etc.
Prepare and reconcile the reports of the daily cash collection, subscriber payments, etc. and supports the operation of daily cash collection and payments.
Preparing and presenting accounting reports, weekly, monthly and yearly internally and externally.
· Analyze financial information and summarize financial status.

· Performing monthly closings, maintenance of accounting files, and preparation/organization of various financial forms, reports, and financial analyses, etc.

· Assist with tax audits and tax returns.



Qualifications and Skills

At least 5 years' experience in Construction Industry
Degree holder of the same discipline.
IT literate, numerate, analytical and advanced use of accounting software.
Arabic & English Language is a must.
Exceptional communication and presentation skills, both written and verbal.
Qatar driving license is a plus.


Benefits

Annual Leave
Annual Ticket
Private Medical Insurance
Other benefits as per Qatar Labour Law


Job Type: Full-time

Salary: QAR 10,000 to QAR 12,000 /month

Senior Fire Protection Engineer

Job Description Not available

Senior Mechanical Engineer


Senior Quality Assurance and Quality Control QAQC

Job Description:
• Serve as the Principal Point of Contact for administration of the Quality Management System (QMS).
• Identify and maintain measures for quality and pursue a measurable increase in quality over time.
• Identify and initiate process improvements
• Track and provide quality metric based reporting to management team.
• Perform quality assurance checks of client deliverable.
• Identify and support staff training needs.
• Ensure compliance with the ISO 9001-2015 requirements.
• Ensure all activities relating to QMS are updated and reported on time.
• Follow up implementation of QMS to ensure all requirements of ISO 9001/2015 standard are implemented effectively.
• Planning & managing external audits and internal system, process and product audits.
• Follow up corrective actions.
• Reporting the result of internal quality audit before the Management Review Meeting

Requirements:

• +8 years combined professional experience in design, construction and/or project management, with five (5) years’ experience in engineering-related quality control/quality assurance required.
• BS degree in engineering discipline required.
• Root Cause Analysis and Problem Solving
• PDCA (Plan, Do, Check, Act)
• Continuous Improvement
• Change Adaptability
• Ability to create and implement Quality Management Programs (QMPs) for use on different projects.
• Technical writing experience.
• Knowledge of Risk MAP and deliverable requirements.
• Excellent quantitative and presentation skills, including proficiency in Microsoft Office applications.
• Strong attention to detail.
• Self-motivated with strong interpersonal skills, maintain professional candor at all times.
• Excellent communication and organizational skills.
• Must have residency visa with NOC letter, must have UPDA.

Senior Safety Engineer

Job Description Not available

Site Cable Inspector

Minimum Qualifications:

Minimum diploma in Electrical Engineering Discipline from reputable university. Minimum Experience:
Should have worked for a minimum of 8 years in the capacity of EHV cable supervisor in the relevant field and should have handled major transmission projects (132kV/220/400 kV systems) involving supervision, inspection, erection and commissioning & testing of EHV cables & associated equipment and facilities etc

Should have experience in verification of selected material, route survey, inspection of existing underground cables, replacement of OHL and provision of underground HV cables, termination of cables.

Must be fully conversant / referred all relevant international standards and should have working experience in ISO 9000 systems.

Must have hands-on experience in supervision of cable jointing at least up to 220 kV.

Conversant with all aspects of procedures, method statements and SAFET Y RULES AND PROCEDURES of cable laying and jointing of EHV cables up to and including 220 kV.

Site Civil Engineer

Minimum Qualifications:

Minimum bachelor Degree in civil Engineering from reputable university.
Experience:

Should have worked for a minimum of 10 years in the capacity of site engineer level in the relevant field and should have worked in major substation &Transmission projects (132kV/220/400 kV systems) involving supervision, inspection, erection of sub stations, buildings/facilities, cable trenches and associated transformer foundations, steel structures, switch yards, OHL systems, underground HV cables.

In the above projects he should have carried out / prepared preliminary studies, tender documents, contract procedures, technical specifications, bid evaluation.

Must be fully conversant / referred all relevant international standards and should have working experience in ISO 9000 systems.

Site Civil Inspector

Minimum Qualifications:

Minimum Diploma in civil Engineering from reputable university. Experience:
Should have worked for a minimum of 10 years in the capacity of civil site supervisor level and should have worked in major substation & Transmission projects (132kV/220/400 kV systems) involving supervision, inspection, erection of sub stations, buildings / facilities, cable trenches and associated transformer foundations, steel structures, switch yards, OHL systems, underground HV cables.

Must be conversant / referred all relevant international standards and should have working experience in ISO 9000 systems.

Site Electrical Inspector

Job Description Not available

Site HSE Inspector

Job Description Not available

Site MEP Inspector

Job Description Not available

Site Supervisor - MS002

Site Supervision Experience
Available in Doha - Qatar with Transferable Visa (NOC)
Minimum 6 years experience

Substation Engineer (Site)

Minimum Qualifications:

Bachelor Degree in Electrical Engineering from reputable university. Experience:
Should have worked for a minimum of 10 years in the capacity of engineer level in the relevant field and should have worked in major projects of substation & transmission systems (132kV/220/400 kV systems) involving supervision, inspection, erection and commissioning & testing of GIS, circuit breakers, overhead transmission lines, transformers and all auxiliary systems of substation.

In the above projects he should have carried out / prepared preliminary studies, tender documents, contract procedures, technical specifications, bid evaluation.

Must be fully conversant / referred all relevant international standards and should have working experience in ISO 9000 systems.

Substation Supervisor (Site)

Minimum Qualifications:

Diploma in Electrical Engineering Discipline from a reputable university. Experience:
Should have worked for a minimum of 10 years in the capacity of supervisor level in the relevant field and should have worked for major projects (132kV/220/400 kV systems) involving supervision, inspection, erection and commissioning & testing of GIS, circuit breakers, overhead transmission lines, transformers and all auxiliary systems of substations.

Must be fully conversant/ referred all relevant procedures, method statements, and international standards and should have working experience in ISO 9000 systems.

TESTING And COMMISSIONING - SENIOR ELECTRICAL ENG

TESTING & COMMISSIONING - SENIOR ELECTRICAL ENGINEER
JOB CODE - MS001

IMMEDIATELY AVAILABLE
RESIDENCE IN QATAR
NOC AVAILABLE

TESTING And COMMISSIONING-ELECTRICAL/SITE ENG J

TESTING & COMMISSIONING – ELECTRICAL / SITE ENG

JOB MS001
IMMEDIATELY AVAILABLE
RESIDENCE IN QATAR
NOC AVAILABLE

TESTING And COMMISSIONING-MEP/SITE ENG JOB MS00

TESTING & COMMISSIONING – MEP / SITE ENG
JOB MS001
IMMEDIATELY AVAILABLE
RESIDENCE IN QATAR
NOC AVAILABLE

TESTING And COMMISSIONING-MEP/SITE ENG JOB MS001

TESTING & COMMISSIONING – ELV / SITE ENG
JOB MS001
IMMEDIATELY AVAILABLE
RESIDENCE IN QATAR
NOC AVAILABLE

TESTING And COMMISSIONING-MEP-ENG-JOB MS001

TESTING & COMMISSIONING - MEP ENGINEER
JOB CODE MS001

IMMEDIATELY AVAILABLE
RESIDENCE IN QATAR
NOC AVAILABLE

TESTING And COMMISSIONING-SENIOR ELV ENG-JOB-MS

TESTING & COMMISSIONING – SENIOR ELV ENG –
JOB MS001
IMMEDIATELY AVAILABLE
RESIDENCE IN QATAR
NOC AVAILABLE

TESTING And COMMISSIONING-SENIOR MEP-ENG-JOB MS

TESTING & COMMISSIONING - SENIOR MEP ENG -
JOB MS001

IMMEDIATELY AVAILABLE
RESIDENCE IN QATAR
NOC AVAILABLE

TESTING And COMMISSIONING-SITE ELECTRICAL-ENG-J

TESTING & COMMISSIONING - SITE ELECTRICAL ENGINEER

JOB CODE MS001

IMMEDIATELY AVAILABLE
RESIDENCE IN QATAR
NOC AVAILABLE